Category Archives: Roller Crusher

DSMAC PCX high-efficiency fine crusher in coal crushing production line

Posted on by
Reply

PCX high efficiency fine crusher has been widely used in the fields of mine gold, silver, copper, iron and non-ferrous metals crushing operations, and the traditional quarries and other non-metallic, refractories, potassium feldspar iron ore crushing plant for material crushing, which all achieve good economic and social benefits. The average of discharge size of PCX high-efficiency crusher is less than 3 mm. What’s more, 21 crusher hammers are fixed on the hammer handle hub by a bolt, constituting the rotor. So after the material enters into the crusher, the material is crushed by the high speed rotation hammer hitting, and reflected onto the other hammers and lining plates again, and after several reflecting and repeatedly crushing, and finally through the gap between the adjustable counter plate and hammer, and the slit with the sieve plate, the qualified final products are screened out.

As we all know, Stone has hard texture, and belongs to a class of materials hard crushing, and the compressive strength is about 117.6 × 103-235.2 × 103kPa, and the foundation carrying capacity is up to 119.6 × 103-235.2 × 103kPa, so it is widely used in construction projects. In road and bridge structure, it is used as a bridge table or seat pad stone or used as pavement abrasion resistance material in intermediate or advanced highway pavement.

For example, a rock plant in India purchased a set of crawler mobile crusher, a set of PEX300×1300 fine jaw crusher and two sets of PCX800 × 1000 high-efficiency crushers from DSMAC, and they are used in a 1000 TPH coal crushing plant. The coarse jaw crusher is used as primary crushing machine, fine crusher is used as the secondary crusher and high-efficiency fine crusher as tertiary crushing machine. And the final products whose size is 5mm or less accounted for 95%. This crushing production line can produce outstanding aggregate crushing plant, and the flakiness (melon shaped meters) content is less than 5%, so it is used as local highway aggregate in concrete mixing station.

http://www.dsmaccrusher.com/ore_crushers/limestone-crusher-processing.html

How to wisely choose your coal crushing equipment?

Posted on by
Reply

As we all know, the coal dug from the earth or underground is screened and processed to remove the gangue and iron pyrite, then the final product is raw coal. And also, the raw coal includes the coal produced without any special treatments such as washing, screening, and processing. While, there is also one kind of coal who is produced with the raw coal process, but it doesn’t belong to raw coal, so we call it coal gangue.

But no matter which material we want to crush, raw coal or coal gangue; if we want to choose the most suitable crushing equipment to apply, there are many aspects we should take consideration.

As for raw coal, the moisture content decides the equipment directly. While,as for coal gangue, the size of the raw material of coal gangue certainly influences our choice.

Raw coal crushing equipment choice

If the moisture content is less than 10%, we should choose the PCH ring hammer crusher. As a type of hammer crusher, this equipment is applied for non-cohesive material crushing, and its moisture content should be less than 10%. It can be used in raw coal crushing production line and sand making production line. In addition, it can replace the cone crusher in a beneficiation production line. And it is suitable for moderately hard and weak corrosivity material crushing, such as gangue, coal, salt, chalk, gypsum, tile, limestone, coke, red sandstone, slag, shale, etc.

If the moisture content is more than 10%, we should choose a 2PG roller crusher. As a type of roller crusher, it is suitable for primary and secondary crushing, and the moisture content of material is more than 10%. They guarantee a strictly defined final grain size with a minimum of fine grains. It is used to crush coke, sinter, coal, soft to medium-hard rock, ore, chalk, broken glass and similar products.

Coal gangue crushing equipment choice

If the size of the raw material of coal gangue is more than 80 mm, the DPX single-stage fine crusher is your best choice. This type of crushers is suitable for moderately hard and easily breakable material crushing, and its mok’s hardness is less than 150 Mpa. It features transforming the 2 stages crushing process into 1 stage to reduce the cost and make the whole operation easier. In addition, it also can reach a magical effect of “more crushing and less wearing”.

If the size of the raw material of coal gangue is less than 80 mm, we can select a PCK reversible hammer crusher. It can be called a type of special equipment just for coal gangue crushing. It can be applied the moderately hard and easily breakable material crushing, and the material Mok’s hardness is less than 120 Mpa. And it is famous for its three main advantages: 1. Roll hammer crusher and impact crusher into one. 2. It has the powerful “tertiary crushing cavity” to crush the material more efficiently. 3. The super wear-resistant material “big gold tooth” crusher hammers are its main crusher parts, which makes the spares service life last more than 17 months. Among these features, the last one is its biggest advantage.

 

DSMAC crushers group provides crushers and grinding mills in quarry and ore plant Professional crusher,ore crusher,stone crushing plant,feeder and screen in mining industry and beneficiation plant.

If you want to konw more information about coal crushing or other material crushing ,you can visit:

http://www.dsmaccrusher.com/